Aruba Instant On 1960 24-Port Gigabit Switch, Layer 2+ Smart Managed, Cloud Managed, Non-POE, Rack Mountable, UK Plug (JL806A)
Back to Top

Aruba Instant On 1960 24-Port Gigabit Switch, Layer 2+ Smart Managed, Cloud Managed, Non-POE, Rack Mountable, UK Plug (JL806A)


Out of stock

SKU: JL806A Category:


The 1960 24-port JL806A Switch is a high performance, smart-managed stackable switch designed for small and growing businesses, fast and easy set-up and security you can trust. You can stack up to 4 x 1960 switches at 1G and 10G speeds, enabling management through a single IP address, simplifying network operations, supporting both local and cloud-managed stacking. Using either local web GUI, Instant On mobile app or cloud-based web portal, you can quickly set up, monitor and manage the switches from anywhere at anytime.

High-performance 10 gig connectivity
For environments with heavy bandwidth needs, 10GBase-T and SFP+ uplink ports deliver lightning-fast network speeds and eliminate traffic bottlenecks. 24 and 48-port Gigabit (PoE and non-PoE) models and a 12-port aggregation switch provide options for both flexible and affordable deployment.

Stack up to four (4) 1960 switches
Simplify network management by stacking up to (four) 4 1960 (access and aggregation) switches and managing them through a single management interface. You get up to 288 ports, including 16 10G uplink ports, for high-density environments, as well as flexibility for future network expansion.

Easy to use cloud-managed stacking
In a few simple steps, set up and configure a stack with the Aruba Instant On mobile app. You can manage the stack and ports remotely, and you’ll minimize network downtime – if the master switch within 1960 Series stack fails, another switch takes over, keeping your network up and running.

Future-proof your network
Advanced switching capabilities like Layer 3 IPv4, IPV6 static routing, ACLs, and Spanning Tree Protocols support apps and devices you have today, as well as those you may add in the future. And True Stacking makes it easy to configure, manage, and troubleshoot physical switches as one single entity, helping scale the network as your business grows.

PoE Over Ethernet (PoE) support
The 1960 switches support Class 4 and Class 6 PoE on selected ports. Up to 30 W PoE power delivery is available for Class 4 PoE devices like access points, surveillance cameras and VoIP phones, and up to 60 W PoE power delivery is available for Class 6 PoE devices like pan-tilt zoom cameras and video enabled IP-phones.

Robust security
Protect your business data and keep unauthorized users off the network with advanced security features like IEEE 802.1X, MAC authentication, VLANs, Network Access Control (ACL), Port Security, DHCP snooping, ARP attack prevention and RADIUS authentication.


I/O Ports and Slots
24 RJ45 autosensing 10/100/1000 Mbps ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
2 SFP+ 10GbE ports
2 10GBASE-T ports

Physical Characteristics
350.5(d) x 442.5(w) x 43.95(h) mm
8.7 lb (3.9 kg)

Processor and Memory
Single-Core ARM v7 Cortex-A9 @800MHz; 1GB DDR3; 512MB NAND flash; Packet buffer size: 1.5 MB

100 Mb Latency: < 4.4 uSec
1000 Mb Latency: < 2.2 uSec
10000 Mb Latency: < 1.1 uSec
Throughput (Mpps): 95 Mpps
Capacity: 128 Gbps
Routing Table size (# of static entries): 32 IPv4/IPv6
MAC Address table size (# of entries): 16,000 entries
Reliability MTBF (years): 123.0

Operating temperature: 0°C-40°C, 0-10,000 ft
Operating relative humidity: 15% to 95% @ 104°F (40°C) non-condensing
Non-operating/Storage temperature: -40°F to 158°F (-40°C to 70°C) up to 15000 ft
Non-operating/Storage relative humidity: 15% to 90% @ 149°F (65°C) non-condensing
Altitude: up to 10,000 ft (3 km)


Electrical Characteristics
Frequency: 50Hz/60Hz
AC voltage: 100-127VAC / 200-240VAC
Current: 0.6A/0.2A
Maximum power rating: 100-127V: 60W/200-220V: 80W
Idle power: 100-127V: 30W/200-220V: 40W
Power Supply: Internal power supply

Mounts in an EIA standard 19 in. telco rack or equipment cabinet. 2-post rack kit included
Supports table-top mounting
Supports rack-mounting
Supports wall-mounting with ports facing either up or down
Supports under-table mounting using the brackets provided
Must be mounted top surface up. To prevent possible impact to long-term reliability, product should not be mounted upside-down

Additional information

Weight 5.75 kg


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.